Worlwide shipping, purchase without VAT. More info.

Lama Home Wall - Wall Mounted

Tilting climbing wall for home training. 3 different kickborad heights, wall mounted version. 

Kickboard Height
Chosen variant is not available. Reset selected parameters.
Made to order in 3-5 weeks :) Made to order in 3-5 weeks :) Made to order in 3-5 weeks :) Choose variant
Brand: Lama Holds
1 988,44 € 1 908,75 € 1 789,20 € from 1 789,20 €
Lama Home Wall - Wall Mounted
Our Pick Worldwide shipping* + 10% dicount for holds

Your personal climbing gym

"Imagine getting up in the morning, brushing your teeth, making some coffee and heading straight to the climbing gym. In your own bouldering gym. Can you finish the project from the night before?"

Lama Home Wall is your personal climbing gym. Compact, reliable and affordable. This tilting bouldering wall fits into any interior and offers endless possibilities for your daily training. This version is meant to be anchored into a wall - it requires a solid brick or concrete wall, don't try to attach it to a dry wall :) (we designed a free standing version for that case ).

The main board dimensions are 2,4 x 2,4 meters (8x8 feet) - the size of a Moonboard Mini. Due to different ceiling hieghts in different rooms (a garage probably differs from a living room), you can choose from 3 kickboard sizes (the  lower vertical board made just for footholds). No kickboard (lowest version with just the base plate), half kickboard (20 cm high) or a full kickboard (40 cm high). See what suits you the best according to the dimensions chart below. 

 

kickboard total width max. height (10°) max. depth (45°)
0 cm 280 cm 247 cm 168 cm
20 cm 280 cm 261 cm 183 cm
40 cm 280 cm 281 cm 183 cm

Kick it!

It is possible to tilt the wall 10 - 45° (version without kickboard only 10 - 40°). 

- 10-15° is ideal for aerobic endurance training - endless laps on positive holds, important part of a base climbing fitness

- 25-30° for more technical boulders or power-endurance training - mid-length laps on more demanding holds

- 40-45° is a great angle for short powerful boulders - perfect for building higher finger strength

The wall angle is adjusted by a hand winch, placed on the left or right side of the board (whatever side suits you the best). The wall is fixed in place (apart from the steel winch cable) also with a securing strap on each side and 2 braces with a slot and screw (the slot helps to adjust the wall to an exact angle just by eye - no need to measure anything). This three-point system ensures high wall security and prevents the main board from moving away from and towards the wall.  It just sticks like nailed in any position.

Place it anywhere!

The Home Wall system is modular - made by smaller parts, which brings at least 2 main advantages - the product can be shipped all over the world on a pallet (and you can easily transport it anywhere in your house - either the basement or the attic - fitting even the smallest door). All the parts are 120 cm long at most.

Second, all the parts can be combined together to create smaller or bigger walls (in case you move to a bigger flat in the future and you want to expand your climbing wall, you don't have to buy everything again).

Put some holds on it!

The bolt holes are Moonboard Mini compatible - spaced in a 20 cm grid (20 x 20 cm square) - so you can use Ben's holds with an app if you have them ;) Lama Home Wall has double the amount of bolt holes though - the hole rows are 10 cm above each other and every second row is 10 cm offset. Maximum hold density is 50 pcs / m2. We recommend to use at least 20 - 25 holds / m2 to utilize the board's potential. 

When you buy a Home Wall, we will give you a 10% discount voucher for any holds. 

 

The Home Wall is delivered including all fasteners, tools and assembly instructions. The only extra tool you need is a cordless screw driver. Torx TX20 bit, 17 mm wrench and 8 mm allen key is included! We even  give you some spare bulldogs. 

The main frame is anchored into the wall with enclosed wall plugs and screws (or by glueing in some threaded rods, if you doubt the wall's strength). 

 

Lama Home Wall in made only for indoor use ! If you want to use the wall outside, you have to build a roof above it. Consult the construction with your carpenter (or contact us at our e-mail and we will figure something out).

Transportation - the transport cost is calculated individually but we can ship (almost) anywhere in the world. The whole Home Wall weighs about 150 - 200 kg (depending on the version) and it fits on standard EU pallet 120x80 cm. Shipping to most of Europe is around €100-€200.

FAQ

How is the wall anchored into the wall?

There are several options, depending on the quality and composition of the masonry. It can be anchored with conventional dowels and screws, glued with threaded rods or anchored with expansion bolts. Let us know which option would suit you best and we will send you proper material together with the wall.

What is the minimum ceiling height where I want to place the wall?

You can find it clearly listed in the table above.

Can you customize my wall? 

We can make basic adjustments, such as lowering the support structure slightly due to the height of the ceiling. Unfortunately, we do not make adjustments to the dimensions of the main board.

What all is included in the wall?

Complete building material, clearly labelled for easy assembly according to the instruction manual, boards with pre-drilled holes and nuts (bulldogs), hand winch with steel cable, pulleys, carabiners, wall anchoring material (dowels or threaded rods), complete fasteners etc. We even give you some spare bullgogs. Holds are not included in the wall.

How does the wall come packaged?

We pack on a standard europallet, the dimensions are approx. 120 x 80 x 50 cm and the wall weighs around 200 kg depending on the configuration.

How long does it take to asseble the wall?

This is a tough question! It depends on your skill level obviously. Better save the whole day or even the weekend :).

How much will the postage cost me?

Depends on destination. For an idea: west and central Europe - 100 - 150€; USA, Canada - approx. 2000 € (yeah, it´s a heavy and bulky package). Final shipping fee is calculated individualy, if you send us an inquiry, please send us your ZIP code and we´ll check delivery options for you. 

Can I build the wall outside?

We do not recommend it. In case you insist on it, some kind of roofing must be built over the wall. Even so, due to the air humidity, the wall will suffer more than if used indoors.

 

I'm a VAT payer in the EU (or I live outside the EU). Can you invoice me without VAT?

Sure thing. More info here.

Be the first who will post an article to this item!

Only registered users may submit ratings. Please log in or sign up.

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field: